width="120" height="25"    width="100" height="25"   width="130" height="25"    width="120" height="25"    width="100" height="25"    width="190" height="25" 
      width="120" height="25"    width="100" height="25"   width="130" height="25"    width="120" height="25"    width="100" height="25"    width="100" height="25"                    width="38" height="20"     width="38" height="20"
 

PRODUCTS

Universal
Section Rolls

Z402

CP20

CP30

CP40

CP60

Specialty &
Coiling Rolls


CPS20

CPS35

CPS50

Full CNC
Section Rolls


BA20

BA35

BA50

Manual Benders

Our Clients

Testimonials

EXHIBITIONS




Plate Rolls

Angle Rolls

Rebar Benders

Ornamental
Bar Workers


Presses

Notchers


_______
images/nommalogo.jpg
MEMBER
_______

The NOMMA
metalfab Shop Tour
Picture Gallery


 

  CPS SERIES ROLL BENDERS    EAGLE CP30 Universal Section Benders are available in 7 Versions with identical capacity so you can match your needs to your budget. Our benders have Standard Features that are beyond comparison and are the Most Popular and Widely Used Bending Machines in the Industry.
CPS-20, CPS-35, CPS-50     1” to 2-1/2" Capacity
POWERFUL EAGLE CPS Series Roll Benders are Hydraulic, Initial Pinch Universal Roll Bending Machines with all 3 rolls driven and primarily designed for One Pass Rolling. They are The Choice for production settings and coiling operations. BA Series versions of these 3 machines are Direct Radius CNC Controlled Machines. The CPS Series Roll Bending Machines offer features that are beyond comparison. Several Versatile Versions give you Renowned Eagle Quality and the best solutions to fit your budget. You benefit from over 24,000 machines produced over many decades of manufacturing innovation and experience.
Compare our Features & Benefits and Make the Best Decision for your Company!
STANDARD FEATURES & BENEFITS FOUND ONLY ON EAGLE BENDERS!
  • Solid Steel Main Frames, CNC Machined and Stress Relieved are the heaviest in the industry and eliminate troublesome castings. Our machines do not require external shaft tie bars when bending heavy sections
  • Limited Lifetime Warranty on all of our machine main frames is standard
  • NEW DP7 Auto-Repeat Programmable Control with 40-position memory on hydraulic versions for repeat bending and will Display Your Bending Radius when used with our Optional Digital Radius Instrument
  • Large High Brightness LED Readout on all models to monitor the bending roll position
  • CPS 35 & CPS 50’s Operate in Both Vertical and Horizontal Positions, horizontal operation is optional on CPS20
  • All 3 Shafts Driven and all tooling components are smooth surfaced, non marring
  • Standard Universal Tooling Set has 15 Components and manufactured from Hardened Tool Steel 55HRC
  • Hardened Steel Shafts are journaled Dual Tapered Roller Bearings
  • Patented Z-Block Top Journal Increases Rigidity for truer to plane rolling
  • Hardened/Sintered Guides & Ways with Adjustable Gibbs on every Eagle Bender
  • Dual Foot Pedal Controls for forward/reverse rolling have Steel Protective Covers
  • Anti-Pinch’ Mill Scale Covers protect internal components from mill scale and are an extra safety feature
  • Concealed Internal Hydraulic Ram cannot be damaged by accident, nothing is exposed
  • Dual Emergency Stop Buttons 1 on machine + 1 on the console for enhanced operator safety
  • Flush Mounted Electrical Panels are out of harm’s way in your shop environment
  • Easy Access Tool Storage Compartment in the machine base for convenience
  • Mobile Control Console with long trailing lead allows safe operator distance from the work-piece
  • Renowned Brand Name OEM Components are non- proprietary and available worldwide
   3 MACHINE SIZES AVAILABLE
Eagle CPS Series Machines are Hydraulic Initial Pinch Universal Roll Bending Machines with all three rolls driven designed primarily for One Pass Rolling. Standard with Lifetime Frame Warranties, Precision Hydraulics, 400 Position Automatic Positioning Controls, LED Readouts, Dual Safety Stops, Universal Tooling, Vertical/Horizontal Operation, Universal Tooling and More! CPS Benders are also available in Variable Speed (REV), Automatic Cycle (AUT)   CPS50 Hydraulic Adjust, 3 Driven Rolls, LED w/ DP7 Touch Screen Auto-Repeat Controls – REV Version has Variable  Rolling Speed – BA50 is Full CNC Controlled
     
Eagle CPS Series Machines are Hydraulic Initial Pinch Universal Roll Bending Machines with all three rolls driven designed primarily for One Pass Rolling. Standard with Lifetime Frame Warranties, Precision Hydraulics, 400 Position Automatic Positioning Controls, LED Readouts, Dual Safety Stops, Universal Tooling, Vertical/Horizontal Operation, Universal Tooling and More! CPS Benders are also available in Variable Speed (REV), Automatic Cycle (AUT)   CPS35 Hydraulic Adjust, 3 Driven Rolls, LED w/ DP7 Touch Screen Auto-Repeat Controls – REV Version has Variable  Rolling Speed – BA 35 is Full CNC Controlled
 
Eagle CPS Series Machines are Hydraulic Initial Pinch Universal Roll Bending Machines with all three rolls driven designed primarily for One Pass Rolling. Standard with Lifetime Frame Warranties, Precision Hydraulics, 400 Position Automatic Positioning Controls, LED Readouts, Dual Safety Stops, Universal Tooling, Vertical/Horizontal Operation, Universal Tooling and More! CPS Benders are also available in Variable Speed (REV), Automatic Cycle (AUT)

 

CPS20 Hydraulic Adjust, 3 Driven Rolls, LED w/ DP7 Touch Screen Auto-Repeat Controls – REV Version has Variable  Rolling Speed – BA 20 is Full CNC Controlled

OPTIONAL TOOLING

Eagle maintains a wide variety of Optional Tooling designed and manufactured In-House in steel or polymer materials for a wide variety of special profiles AND extrusions. We offer several solutions for Cap Rail Tooling to suit your budget and rolling needs. Send us samples and drawings, we do the rest for you!

ACCESSORIES - We stock Round Tube & Pipe Roll Sets, Angle Rolling Tooling for Leg-In & Leg-Out, Wide Flat & Tight Diameter Rolls, Replacement Roll Components, V-Groove Rolls for rolling square tube on the ‘diamond’ as well as Coiling Calibration supports. We maintain thousands of replacement machine parts in stock for rapid delivery!

Click TOOLING button for photos and descriptions of our wide selection of options

SPECIFICATIONS
Material

CPS20

CPS35 CPS50
1x1/4"  Ø8" 2"x3/8"  Ø14" 2-3/4x1/2  Ø20"
1-3/4"x3/8"  Ø10" 3-1/2"x5/8"  Ø16" 4x5/8  Ø14"
1/2"  Ø5" 1-1/4"  Ø16" 1-1/2  Ø24"
3/4"x3/16"  Ø8" 1-1/2"x1/4"  Ø16" 2-1/4"x1/4"  Ø30"
3/4"x3/16"  Ø10" 1-1/2"x1/4"  Ø22" 2-1/4"x1/4"  Ø38"
1"  Ø6" 2  Ø14" 2-1/2" Ø20"
1"  Ø6" 2  Ø16" 2-1/2"  Ø20"
1-1/4"  Ø8" 2-1/2"  Ø18" 3-3/4"  Ø26"
1-1/4"  Ø10" 2-1/2"  Ø20" 3-3/4"  Ø30"
1/2"  Ø4" 1-1/4"  Ø16" 1-1/2"  Ø24"
1/2"  Ø12" 1-1/2"  Ø20" 2"  Ø36"
1-1/4"x1/16" Ø16" 2-1/2"x1/16"  Ø30" 2-1/2"x10ga.  Ø34"
3/4"x1/16"  Ø12" 1-1/2"x1/8"  Ø40" 2-1/4"x1/8"  Ø50"
1-1/4"x3/8"x1/16" 2" x 1-1/4"x1/8" 2-3/4"x1-1/2" x1/8"
Bending Adjustment H H H
Driven Rolls 3 3 3
Rolling Speed FPM 10 13 16
Working plane Vertical Vert./Horiz Vert./Horiz
Repeat Control Auto Repeat Auto Repeat Auto Repeat
Installed Power HP 0.75 2.25 4.75
Approx. Dimensions 13x24x45h 27x32x40h 33x44x49h
Approx. Shipping Wt Lbs 400 1100 1650
 
Our Application Specialists will assist in selecting a machine best suited to your requirements
sales@eaglebendingmachines.com
WEB SITE TERMS AND CONDITIONS